time2013/03/26
At present, because there are too much competition in the domestic anti-static floor industry, Together with the soaring steel price , many manufacturers do shoddy work and use inferior materials.Shoddy product flooded, causing difficulties to the competition.
Shoddy product jerry methods have the following points:
1 The thickness of anti-static floor plate from 0.8mm down to 0.3mm, 0.4mm, There is no strength on the floor, let alone reach to the national standard. Lead to that anti-static floor is too soft, Four sides will cupping in a very short time. Lead to the floor’s rupture,then we can not walk on the floor.
2 Antistatic veneer can not reach the anti-static standard,that is the resistance of anti-static surface value is less than 1 * 105 1 * 109 ohms, It results that customers seem to buy anti-static flooring, actually customers are buy the raised floor, rather than anti-static flooring.
3 Surfaces can not reach high wear resistance,the floor can not be used for a long time. the surface pattern veneer has worn away. This veneer is not add the wear-resistant paper to the surface.
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.